MATERIALS

/MATERIALS
MATERIALS2018-05-16T12:31:32+00:00

Structure
Made of 18 mm. thick wooden particle panels with low formaldehyde emission (class E1). The panels are water repellent (meet the V100 norms), coated on both sides with melamine paper in plain mat or wooden colours. Edged on four sides with 0.4 mm. thick laminate and 1mm./1.5mm. thick ABS or PVC.

Wooden shelf
Made of 18 mm. thick wooden particle panels with low formaldehyde emission (class E1). The panels are water repellent (meet the V100 norms) and coated on both sides with melamine paper in plain mat or wooden colours. Front edge made of 1 and 1.5 mm. thick ABS or PVC, other three edges of 0.4 mm thick laminate. The shelf is assembled through a special anti-slip hardware.

Glass shelf
Made of 8 mm thick tempered float glass up to 60 cm widths, with four polished edges. The shelf is assembled through a special anti-slip hardware.

Back panel
Made of 3 mm thick wooden fibres panels with low formaldeyde emission (class E1). Coated on the front side with melamine paper in plain mat or wood-
en colours and with a bright one side paper on the back.

Visible sides
Made of 18 mm. thick wooden particle panels with low formaldehyde emission (class E1). The panels are water repellent (meet the V100 norms), coated inside in mat melamine finish. The outer side can be delivered in several veneered finishes (cherry, oak and paint oak) with front wooden edge and lower, upper and back edges made of 0.4 mm laminate.
Alternatively they can be embossed mat lacquered with mat lacquered front edge; upper, lower and back edges in 0.4 mm. thick laminate. Or glossy lacquered on the two sides and all edges.

Miscellaneous
The supports to hang the wall units to the wall are tested to support loads up to 70 kgs each.
The supports to fix the hanging base units to the wall cannot be adjusted in height and don’t carry alone the weight of the cabinets; therefore they must be combined with a 25 or 30 cm high plinth coated with steel, which works as a support.
The bottom of the under sink base unit is coated with aluminium, in order to prevent any damage by water leakage, detergent corrosion and condensation on the siphon.
The bottom of the refrigerator column is in thermoplastic material, designed to channel and make flow out water leakages due to infiltrations or condensation, thus protecting the cabinet structure.

Flat mat lacquered door
Made of 18 mm. thick wooden particle panels with low formaldehyde emission (class E1). Coated on the two sides and the shaped edges with 0.7 mm thick Low Pressure laminate. The edge, in the same colour of the door surface, is made of 1-2 mm thick ABS or PVC. Painted with grasping primer and in polyurethane finish.

Low Pressure laminate door
Made of 18 mm. thick wooden particle panels with low formaldehyde emission (class E1). Coated on the two sides and the shaped edges with 0.7 mm thick Low Pressure laminate. The edge, in the same colour of the door surface, is made of 1-2 mm thick ABS or PVC and refers to the not shaped edges.

Glossy laminate door
Made of 18 mm. thick wooden particle panels with low formaldehyde emission (class E1). Coated on the two sides and the shaped edges with 0.7 mm thick High Pressure laminate. The edge, in the same colour of the door surface, is made of 1-2 mm thick ABS or PVC and it refers to the not shaped edges.

Polymer door with grains
Made of 18 mm thick wooden particle panel with low formaldehyde emission (class E1). Coated on the two sides and edges with whitw polymer cover. Lacquered version: painted with grasping primer and in polyurethane finish.

Smooth polymer door
Made of 18 mm thick wooden particle panel with low formaldehyde emission (class E1). Coated on the external side and edges with a one-tone polymer cover in mat or glossy versions, or with a wood-look polymer cover in mat or glossy versions. The inner side is always coated with a mat white polymer cover.

Oak wooden door with frame
Frame made of wooden particle panel coated with oak veneer with, 22 mm total thickness. Inner panel made of 18 mm thick wooden particle board, with low formaldehyde emission (class E1) coated with oak veneer. Finishes: whitened oak, cherry colour oak, wenge colour oak, grey colour oak. Varnished with transparent acrylic paints.

Flat direct glossy lacquered door
Made of 19 mm thick MDF panels, with low formaldehyde emission (class E1). Painted with grasping primer and in unpolished glossy polyurethane finish.

Flat wooden door
Made of 18 mm thick wooden particle boards, with low formaldehyde emission (class E1), coated with various veneers (European cherry, American cherry, natural oak or wenge colour oak) with 2 mm thick wooden edge in the same material. Varnished with transparent acrylic paints.

Flat polished glossy lacquered door
Made of 19 mm thick MDF panels with low formaldehyde emission (class E1). Painted with grasping primer and in polished glossy polyurethane finish.

Steinless steel door
Door with visible face coated with a 0.7 mm thick AISI 304 steel layer with folded edges, with all corners soldered in the inner part. Inner face made of 18 mm thick wooden particle panel with low formaldehyde emission (class E1).
The panels are water repellent (meet the standard V100 norms), coated on the two faces with plain grey melamine paper and edged on the four sides with 0.4 mm thick laminate.

Laminate door
Made of 18 mm thick wooden particle panels with low formaldehyde emission (class E1), coated on the two faces with HPL laminate in thickness 0.8 mm for the mat versions and in 1.2 mm thickness for the glossy finishes.
Edged on the four sides with 1 mm thick aluminium layer or with ABS in the same colour of the door.

Glass door with oak wooden frame
Frame made of Restinga solid wood coated with various veneers (natural oak, cherry colour oak, wenge colour oak, grey colour oak), with 22 mm total thickness and varnished with transparent acrylic paints. Inner panel of tempered glass lacquered with polyurethane paints in white or grey colour.

Glass door with aluminium frame
Frame of anodised aluminium in 0 chemical or BR5 finish, inner panel of 4 mm thick tempered glass of different types: printed, screen printed or lacquered with polyurethane paints.

Drawers
Sides and back of RAL 9006 grey painted metal. Bottom made of 16 mm thick wooden particle panel with low formaldehyde emission (class E1) coated of the two sides with plain grey melamine paper.
Complete extraction on steel glides set to support high dynamic loads (30 Kg.). To avoid the drawers to come out accidentally, the glides are provided with a snap-in system. They are mass supplied with a closing system (airmatic).
The drawer front can be adjusted vertically and horizontally. The drawers are tested for 80.000 opening and closing cycles.

Pull-out baskets
Sides and back of RAL 9006 grey painted metal.
Bottom made of 16 mm thick wooden particle panel with low formaldehyde emission (class E1) coated on the two sides with plain grey melamine paper. Complete extraction on steel glides set to support high dynamic loads (30 Kg.). To avoid the baskets to come out accidentally, the glides are provided with a snap-in system. They are mass supplied with a closing system (airmatic). The 120 cm wide baskets are supplied with a anti-skid system, excluded the under sink base unit.
The basket front can be adjusted vertically and horizontally. The drawers are tested for 80.000 opening and closing cycles.

Back splashes
Made of anodised aluminium in 0 chemical or BR5 finishes or coated with plain or wooden colour melamine papers; with extruded gaskets both on the worktop and the wall to protect against possible infiltrations.

Plinth
In anodised aluminium in BR5 or 0 chemical finish, with upper and lower extruded gaskets. In plastic coated on the external side with plain or wooden colour melamine paper. Fixed on the feet of the cabinet with plastic hooks to allow an easy removal for cleaning.

Wooden shelf
Made of 30 or 40 mm. thick wooden particle panels with low formaldehyde emission (class E1), coated on the two faces with several veneers (European cherry, American cherry, natural oak, cherry colour oak, wenge colour oak or grey colour oak). Edged on the front and the sides with 1 mm thick wooden edge in the same finish of the faces. The back edge is made of 0.4 laminate.
Varnished with transparent acrylic paints.

Wooden panels
Made of 18 mm. thick wooden particle panel with low formaldehyde emission (class E1). The panels are water repellent (meet the V100 norms), on the visible surface coated with veneers of different types (European cherry, American cherry, natural oak, cherry colour oak, wenge colour oak, grey colour oak). The surface against the wall is coated with counterveneer. Edged in the same finish of the surface with 1 mm thick wooden edge.
Varnished with transparent acrylic paints.

Laminate panels
Made of 18 mm. thick wooden particle panels with low formaldehyde emission (class E1), water repellent (meet the V100 norms), coated with laminate in the various finishes and edged with 0.4 mm thick laminate edge.

Melamine panels
Made of 18 mm. thick wooden particle panel with low formaldehyde emission (class E1), water repellent (meet the V100 norms), coated with melamine paper in various finishes and edged with 0.4 mm thick laminate edge.

Lacquered panels
Made of 18 mm thick wooden panels with low formaldehyde emission (class E1), water repellent (meet the V100 norms), coated with white melamine paper and edged with 0.4 mm thick laminate edge. Painted with grasping primer and polyurethane paints in the mat embossed, glossy direct (unpolished) or polished glossy finishes.

Panels with glass
Composed of a 16 mm thick wooden particle panel with low formaldehyde emission (class E1), coated with white melamine paper and edged with 0.4 mm thick laminate edge. Front 5 mm thick, white, screen printed, tempered glass.

Hinges
In metal subjected to galvanic treatment. With rapid locking, three-way adjustable (vertical, horizontal, depth). 110° mass-produced opening of the cabinet doors. Wall units with dish racks and corner wall units (doors with aluminium frame excluded) with 155° opening. Closing with damper, excluded the columns for appliances with sliding door.

Handles
In die-casted zama with satinized nickel and bright chromium treatments or painted. In die-casted zama with a wooden or neutral methacrylate part. In chromiumplated wiredrawn metal or in 0 chemical anodised aluminium.

Metal shelves
Made of chromiumplated metal wire

Feet
In hard-wearing, 150 or 180 mm high thermoplastic material with millimetric adjustment.

Post-formed laminate
Made of 38 or 58 mm. thick wooden particle panels with low formaldehyde emission (class E1). The panels are water-repellent (meet the V100 norms), coated on the upper surface with HPL laminate (high surface resistance) in top face, wax or quartz finishes available in the colour range. Front side coated by the laminate postforming.

Laminate with front aluminium edge
Made of 38 or 58 mm thick wooden particle panels with low formaldehyde emission (class E1).
The panels are water-repellent (meet the V100 norms), coated on the upper surface with HPL laminate (high surface resistance) in top face and wax finishes, available in the colour range. Front edge of 1 mm thick aluminium.

Laminate with front wooden edge
Made of 38 or 58 mm thick wooden particle panels with low formaldehyde emission (class E1).
The panels are water-repellent (meet the V100 norms), coated on the upper surface with HPL laminate (high surface resistance) in top face and wax finishes, available in the colour range.
1 mm thick front wooden edge of various types (natural oak or wenge colour oak) varnished with transparent acrylic paint.

Layer laminate with front steel edge
Made of 28 mm thick wooden particle panels with low formaldehyde emission (class E1).
The panels are water-repellent (meet the V100 norms), coated on the upper surface with 10 mm thick layer laminate in wax finish, available in the colour range. Front steinless steel edge on the wooden panel only.

Monochrome unicolor laminate with front monochrome edge
Made of 38, 58 or 78 mm thick wooden particle panels with low formaldehyde emission (class E1).
The panels are water-repellent (meet the V100 norms), coated on the upper surface with 1 mm thick, monochrome, layer laminate in wax finish, available in the colour range. Front 3 mm thick monochrome laminate edge.

Laminate with front unicolor edge
Made of 38 or 58 thick wooden particle panels with low formaldehyde emission (class E1).
The panels are water-repellent (meet the V100 norms), coated on the upper surface with 1 mm thick laminate in wax finish, available in the colour range. Front 3 mm thick unicolor laminate edge of various finishes.

Wooden strips
Composed of 20 mm wide solid wood staves, glued together and with smoothed and polished visible surface and edges. 38 mm thick. Available woods: European cherry; American cherry; natural oak or wenge colour oak, varnished with transparent acrylic paint.

Satinized stainless steel
Made of 28 mm thick wooden particle panels with low formaldehyde emission (class E1).
The panels are water repellent (meet the V100 norms), made thicker by means of deal listels to obtain the thickness of 39 or 59 mm, coated with 0.8 mm thick, AISI 304 stainless steel in satinized scotch brite finish. Edged on the front and sides folding the plate, which is welded in the corners.

Light quartz
Made of quartz agglomerate panels (mixture of polyesters and quartz dust) in 12 mm thick slabs, joined with 26 mm thick, water repellent wooden particle panels (meet the V100 norms), with low formaldehyde emission (class E1) to obtain the thickness of 40 mm; with wooden plywood panels to obtain the thickness of 60 mm. Front edge in the same material of the surface; side edges made of BR5 or 0 chemical anodised aluminium or of the same material of the surface.

Crystal
Made of 28 mm thick wooden particle panels, with low formaldehyde emission (class E1).
The panels are water repellent (meet the V100 norms), made thicker with deal listels to obtain the thickness of 60 mm; the upper surface and the front edge are coated with 10 mm thick crystal, the inner face of which is lacquered with water paints.

Marble and granite
Made of 18 mm thick wooden particle panels with low formaldehyde emission (class E1). The panels are water repellent (meet the V100 norms) and made thicker by means of deal listels to obtain the thickness of 60 mm. The upper surface and the front edge are coated with 20 mm thick stone material
All the visible parts are polished and waterproofed with specific products.

Synthetic
12 mm thick surface composed by a natural mineral (aluminium hydroxide) and an acrylic substance, made thicker by means of a multilayer frame to obtain the total thickness of 40, 60 or 80 mm. 12 mm thick front and side edges made of the same material of the upper slab.

Tables

Laminate top with PVC or ABS edges: made of 19 or 28 mm thick wooden particle panels with low formaldehyde emission (class E1), coated on the two faces with HPL laminate. Edged on four sides with 1-2 mm ABS or PVC.

Veneered top: made of 12, 18 or 28 mm thick wooden particle panels with low formaldehyde emission (class E1), coated on the two faces with veneers of various types (European cherry, American cherry, natural oak, cherry colour oak, grey colour oak or wenge colour oak). With four 2 mm thick wooden edges in the same finish. Varnished with transparent acrylic paints.

12 mm thick layer laminate top

Melamine top: made of 18 mm thick wooden particle panels with low formaldehyde emission (class E1), coated on two sides with plain mat or wooden colour melamine paper. Edges of 1 and 1.5 mm thick ABS or PVC in the same colour of the top.

10 mm thick glass top

Metal structure: made of metal painted with aluminium or chromiumplated look.

Wooden base or legs: made of solid beech coated with veneers of various types (European cherry, American cherry, natural oak or wenge colour oak)

Chairs

Metal structure: made of metal painted with aluminium or chromiumplated look.
Wooden structure: made of solid beech painted in the colours of other wood types.

Seats and backs: made of beech painted in the colours of other wood types; oak veneered birch, varnished with transparent acrylic paints; leather; polypropylene; beech lacquered with polyurethane paints.